DMP-50DM
DMP-50M is designed to prepare the desired coolant-lubricant agent / coolant (for machining) based on water-based oils, with the exact percentage concentration (0-50%) according to the user’s expectations.
The mixer is suitable for the preparation of salt-based release agents applicable to casting machines and rolling mills. The mixing systems used in the device prevent sedimentation of the release agent and keep it at a constant, preset concentration, which makes the production process stable and repeatable.
The mixer is suitable for the preparation of salt-based release agents applicable to casting machines and rolling mills. The mixing systems used in the device prevent sedimentation of the release agent and keep it at a constant, preset concentration, which makes the production process stable and repeatable.
⦁ Easy to install, simple to use,
⦁ Easy to disassemble and replace its individual components,
⦁ Allows reading of water and concentrate consumption data,
⦁ It guarantees precise and extremely accurate concentration over the entire operating range
⦁ Easy to disassemble and replace its individual components,
⦁ Allows reading of water and concentrate consumption data,
⦁ It guarantees precise and extremely accurate concentration over the entire operating range
Why it's worth it?
EASY TO INSTALL,
SIMPLE TO USE
ALLOWS READING OF WATER AND CONCENTRATE CONSUMPTION DATA
PRECISE
ACCURATE CONCENTRATION OVER THE ENTIRE OPERATING RANGE
Technical detail
| ELECTRICAL SYSTEM | |
|---|---|
| Power supply | 230 VAC, 50 Hz |
| Power consumption | 0,5 kW |
| Control voltage | 24 VDC |
| Power cord | 3 x 1,5 mm² |
| Main protection | C10 |
| PNEUMATIC SYSTEM | |
| System pressure(supplying pumps and pneumatic operated valve actuators) | 4,5 - 5 bar |
| PROCESS SYSTEM | |
| Maximum usable capacity of the "metering tank" | ~60 l |
| Maximum usable capacity of the "main tank" | ~80 l |
| System capacity | 35 l/min = 2,1 m³/min |
| Max. working pressure of water | 3 bar |
| Max. coolant output pressure | 2-5 bar |
| Max. coolant discharge height | 5 m |
| Operating temperature | +5 do +40°C |
| Max. suction height from external concentrate tank | 5 m |
| Material | Stainless steel 1.4301 |
| ACCEPTABLE SPACING AND OPERATING | |
|---|---|
| Voltage fluctuations | ±10% mains voltage |
| Frequency fluctuations | ±2% of the mains frequency |
| Work environment | inside well-ventilated rooms without explosive, flammable gases/fumes |
| Ambient temperature | +5°C to +40°C |
| Air humidity | max. 70% |
| The height of the location of the installation and the machine | up to 1000 m n.p.m. |
| DIMENSIONS AND WEIGHT | |
| Transport weight(with empty"metering tank" and "main tank") | 170 kg |
| Transport weight (with full "metering tank" and "main tank") | ~310 kg |
| Width | 660 mm |
| Depth | 890 mm |
| Height | 1758 mm |
| ELECTRICAL CONNECTION PARAMETERS | |
|---|---|
| Supply voltage | 230 VAC, 50 Hz |
| Power cord | 3 x 1,5 mm² |
| Main protection | C16 |
| PARAMETERS OF THE PNEUMATIC CONNECTION | |
| Connection diameter | ½” |
| Required pressure at the connection | 5-10 bar (0,5-1 MPa) |
| Required flow rate | 250 NI/min (0,25m3/min) |
| WATER CONNECTION PARAMETERS | |
| Connection diameter | ½” |
| Required pressure at the connection | 2-16 bar |
| Required flow rate | 20-50 l/min |
| Temperature | Min. 5°C - Max. 30°C |
| PARAMETERS OF THE CONCENTRATE CONNECTION | |
| Connection diameter | ½” |
| Temperature | Min. 5°C - Max. 30°C |
